Manufactured from 1mm 316 grade Stainless Steel
Under product features remove available in 430grade and 316 grade stainless steel

»Product Features
»Wide component range suitable for most fuel systems
»For use on domestic and industrial appliances
»4” to 8” diameters available from stock
»Special items and larger diameters available to order

»Technical Information
Manufactured from 1mm 316 stainless steel
Tested to BS EN 1856-2
Complies with Building Document J
Complies with European Standard EN15287

»Lengths
Available in four different lengths -
1000mm, 500mm, 300mm and 150mm
The 1000m, 500mm and 300mm are available with a door
Changeover length this enables the installation of a terminal, as the length has a crimp both ends.

»Elbows
Designed to angle the flue run where necessary. Available in 15°, 30°, 45°, and 90° versions. Also available with door.

»Stainless Steel Single Wall Flues
Provide a cleaning access via the base opening - this is closed with a tee cap (supplied)

»Increaser
Designed to increase the flue size when recommended by the appliance manufacturer. Standard adaptors are used to increase the flue by one diameter - e.g., 4" to 5" However, special adaptors can be made to order.

»Terminals
A range of terminals is provided. For further details see the CHIMNEY COWLS section

»Flashings
Both flat and angled flashings are produced to close off any roof opening. Either a storm collar or apron cravat should be used to provide an effective weather seal.

»Wall Bands
This is an adjustable bracket used to provide lateral stability. made from Aluminium and galvanised steel, it covers a range from 2" to 10"