Products

»‘B’ Vent
Universal is a twin wall metal gas vent system specifically designed for venting domestic or small commercial atmospheric gas appliances. Kitemarked to BS 715: 1993.
For both internal and external use. 'B' Vent Universal comprises a full range of pipe lengths, associated fittings and accessories available in four diameters: 75mm, 100mm, 125mm and 150mm.
Suitable for use with approved gas appliances where the appliance outlet temperature does not exceed 260°C and the pressure in the flue is zero or negative.
'B' Vent Universal may be suitable for use with other types of decorative fuel effect appliances where the chimney and fire form a fully integral approved system.

»K Vent
'K' Vent is a twin wall insulated vent system specifically designed for domestic or small commercial Kerosene burning appliances. For both internal and external use, 'K' Vent comprises a full range of pipe lengths, associated fittings and accessories available in three diameters: 100mm, 125mm and 150mm. Kitemarked to BS 715: 1993.
'K'-Vent is suitable for use on gas appliances with a maximum input rating of 60kW and 28 sec. at (Kerosene) appliances with a maximum rating of 45kW, where the flue gas temperature does not exceed 260°C and when operating at zero or negative pressure at the appliance flue outlet.

»Prima Plus
Advanced corrosion-resistant design and construction using 1mm 316L continuously-welded stainless steel. The only stainless steel system to have passed the internationally-recognised GASTEC corrosion test.
Engineered-tolerance joint simply push-fits together giving exceptional load bearing capacity. Optionally, a locking band can be fitted for extra joint security.
Inward bead on the male joint spigot acts as a capillary break preventing moisture being drawn through the joint.
Adjustable 0-90° elbows quickly solve alignment problems on installation of flue runs.
Can be painted if required.
For condensing appliances a gasket is fitted to the inward bead of the male joint.